Hot Spring Flair
Quick answer
The Hot Spring Flair holds about 335 gallons of water and measures 84 x 84 x 36 inches, seating up to 6. Full of water and people it weighs roughly 4,779 lb.
- Water volume335 gal
- TypeHard-shell
- Dimensions (in)84 x 84 x 36
- Seats6
- Water weight2,794 lb
- Empty weight875 lb
Chemical doses for about 335 gallons
Computed for this tub's water volume, so you can dose without doing the arithmetic. Amounts are ounces by weight.
| To do this | Chemical | Amount |
|---|---|---|
| Raise total alkalinity +10 ppm | sodium bicarbonate | 0.80 oz |
| Raise free chlorine +3 ppm | dichlor granules | 0.24 oz |
| Raise bromine +3 ppm | bromine granules | 0.22 oz |
| Chlorine shock (+10 ppm) | dichlor | 0.80 oz |
Open the dosing calculator for this tub
Add in small steps with the pump running, wait, then retest before adding more. Never mix chemicals together, and always follow your product label, which wins over any calculator.
As an Amazon Associate this site earns from qualifying purchases. Shopping links are affiliate links and cost you nothing extra.
How much does a full Flair weigh?
Empty, the Hot SpringFlair weighs about 875 lb. Its 335 gallons of water add about 2,794 lb, and 6 bathers add roughly 1,110 lb more, for a loaded total near 4,779 lb. Make sure your deck or pad is rated for it. Work out any tub on the filled weight calculator.
Keep the water right
A 335 gallon tub doses in small amounts, so a kitchen scale and small additions beat eyeballing it. Test, balance alkalinity then pH then sanitizer, and use the dosing calculator sized for this tub. Start with test strips and a chemical kit.
Source
The 335 gallon figure is from the manufacturer's published specification: www.hotspring.com. Manufacturer site. 6 persons. Capacities vary with how high you fill and with seats and footwell; confirm against your own manual or a metered fill when precision matters.